ALLProtect™ Original — Heavy Duty Surface Protection
REUSABLE, NON-SLIP AND SELF-ADHESIVE — multi-surface protectors for floors, walls, stairs, and vertical surfaces
✔ PADDED ✔ ABSORBENT ✔ IMPERMEABLE
Durable Floor Protection — Maximum Protection for Your Work Environment
ALLProtect™ Original provides true padded multi-surface protection — one product for every surface on the job site. Self-adhesive, non-slip and durable, it’s built to withstand the toughest conditions on any job site — floors, walls, stairs, countertops, and elevated surfaces — giving you a padded, absorbent, impermeable barrier that protects your high-value assets from damage.
The last thing you need after the work is done is finding a scratched countertop, a scuffed stair tread, a dinged door frame, or a gouge in a floor that had nothing to do with the project you just completed. That’s what padded durable floor protection is for — and why contractors choose ALLProtect™ Original’s multi-surface protection over protectors that only work on one type of surface.
Additional Benefits: ALLProtect™ Original is a reusable, padded & absorbent multi-surface protector — unlike drop cloths, rosin paper, rigid boards, or plastic sheets, one roll of durable floor protection moves with the job instead of swapping products for every surface. The self-adhesive, pressure-sensitive backing sticks firmly in place without tape and won’t shift, then pulls up clean and residue-free when the job is done. Built for high tensile strength, puncture resistance, and slip resistance, this heavy-duty surface protection is tested to hold up where lighter-duty products can’t — lasting for months on the job site and saving you time, money, and the hassle of constant replacement.

USES
- Floors — hardwood, tile, cured concrete and more
- Stairs — treads, risers and landings
- Walls — edge-to-edge fit, no tape needed
- Doorways — edge-to-edge coverage for frames and thresholds
- Cabinets & Counters — laminate, stone and wood surfaces
- Metal Surfaces — stainless steel appliances, fixtures and equipment
- Aircraft surfaces — leading edges, wings, fuselage, engine cowling
- Watercraft surfaces — hulls, railing, decking, hard-tops, consoles
- Valuable Assets — elevators, expensive equipment and other high-value surfaces
BENEFITS
- Multi-surface protection — protects floors, stairs, walls and elevated surfaces alike
- Self-adhesive — pressure-sensitive backing grips the surface without tape
- Padded — absorbs impact from dropped tools and materials, protects against heavy foot traffic
- Impermeable floor protection — blocks liquids, oil, grease and solvents, including MEK (a Skydrol chemical)
- Non-slip — certified GS3/R12 rated, safe even wet or greasy
- Reusable — clean, re-roll and use again
- Absorbent — over 400% liquid absorption by weight
- Residue-free — peels clean every time
- Easy installation — one-person install, no tools required
- Cut to shape — trims easily to fit any surface
- Durable — holds up to heavy mechanical use
- High tensile strength — tested to ISO 9073-3
- Puncture & perforation resistant — tested to EN ISO 12236 and EN ISO 13433
- Zero VOCs — safe for enclosed spaces
SPECS
- Large Roll: 39.37 in x 82.02 ft
(1 m x 25 m) - Large Roll Coverage: 269.1 sq ft
- Two-Pack: 19.69 in x 82.02 ft (x2)
(0.5 m x 25 m) - Three-Pack: 12.99 in x 82.02 ft (x3)
(33 cm x 25 m) - Perforated Roll: 39.37 in x 98.43 ft
perforated every 19.69
(1 m x 30 m) - Stair Kit: (x3) 24.02 in x 82.02 ft + (x1) 2.76 in x 82.02 ft railing wrap
(61 cm and 7 cm x 25 m) - Thickness: >2 mm
- Weight: 350 g/m² (±10%)
- Material: Polypropylene nonwoven
- Backing: PE film, pressure-sensitive acrylic
- Color: Mottled grey (High-visibility Red available)
- Anti-slip classification: GS3 / R12
- Water absorption: >400% by weight
- Tensile strength: >900 N/5cm (MD) / >1150 N/5cm (CD)
- UV resistance: up to 2 months on glass and transparent surfaces
Protect Your Work. Protect Your Reputation.
The premium choice when valuable assets and your reputation are at stake
Contractors, aviation technicians, and marine crews trust ALLProtect™ Original because it works the first time and keeps working — no re-covering, no callbacks, no damage claims. Engineered for the demands of the toughest job sites.
✔ Swiss made by Fritz Landolt AG since 1920 ✔ ISO 9001 certified ✔ Independently tested for tensile strength, puncture resistance and slip resistance ✔ Sold through Boeing Distribution ✔ Used on Gulfstream, Dassault, Bombardier and other business jets ✔ Trusted by luxury home builders, high-end remodelers, hangars and boatyards
Looking for durable floor protectors that handle more than one surface? Our team can help you find the right solution for your job site.
The Many Surfaces ALLProtect™ Original Shields
ALLProtect™ Original works as a heavy duty surface protector on virtually every surface — and valuable asset — a contractor, technician or crew encounters on the job — indoors or out. Here’s where it performs best:

Floors
From hardwood and tile to marble and cured concrete, ALLProtect™ Original is a temporary yet durable floor protection that shields heavy-traffic floors through the toughest phases of any job. Highly absorbent — with over 400% liquid absorption by weight — it’s tested and proven to be impermeable against water, motor oil, grease and standard cleaners, mitigating spills before they reach the surface below.

Stairs
Stairs demand more than floor protection — they demand protection that won’t move. Unlike loose mats or tape-down solutions that can shift, bunch or curl underfoot, ALLProtect™ Original’s self-adhesive backing locks it in place on every tread and riser, giving crews a stable, non-slip surface with genuine footing safety, step after step.

Vertical Surfaces
The self-adhesive backing grips vertical surfaces securely, giving you edge-to-edge coverage without tape — a dependable surface protector for vertical surfaces exposed to job site traffic and equipment.

Doorways
As reliable door protection, ALLProtect™ Original wraps cleanly around frames and thresholds for full edge-to-edge coverage in high-traffic entry points — no tape or fasteners required.

Cabinets & Counters
Shields laminate, stone and wood surfaces from scratches, dents and spills during installation or renovation work — cutting easily to fit any shape.

Metal Surfaces
Protects stainless steel, chrome, brushed metal and other shiny or polished surfaces from scratches and residue during installation, renovation or transport — removing clean, without residue.

Aircraft & Aerospace Surfaces
Certified chemical resistance — tested against Skydrol, motor oil and standard solvents — makes it a trusted protector for leading edges, wings, fuselage panels and engine cowlings in hangars and maintenance bays.

Watercraft Surfaces
As a waterproof floor protector with a certified non-slip (non-skid) surface, it protects hulls, railing, decking, hard-tops and consoles during refits, repairs and detailing — holding up even on wet decks.

Valuable Assets
For elevators, expensive equipment and other high-value surfaces on the job site, ALLProtect™ Original provides the same certified, heavy duty protection — a durable barrier against scratches, dents and spills wherever valuable surfaces need safeguarding.
Important: Before applying ALLProtect™ Original, confirm the surface is clean, dry and free of dust, oils or solvents. On parquet or other wood surfaces, and on polished or glossy metal, the strong adhesive may occasionally lift wood fibers or leave residue — test on an inconspicuous area first. Ideal surface temperature is 41°F to 104°F. Do not use on aircraft or vehicle moving parts; remove completely before movement or engine start.
ALLProtect™ Original on Floors & Stairs
Heavy duty floor and stair protection at work on real job sites — padded, non-slip and self-adhesive enough to grip irregular vertical surfaces like railings, not just flat floors and treads.



ALLProtect™ Original in Aviation
Certified chemical resistance and heavy duty durability, trusted in hangars and maintenance bays for aircraft surface protection.



Reusable, Self-Adhesive & Multi-Surface
Three qualities that set ALLProtect™ Original apart — a self-adhesive backing that sticks without tape, true multi-surface versatility, and a reusable design that cleans up for job after job.



Ready to Protect Your Job Site?
Looking for surface protectors built to handle whatever the job throws at them? See why contractors, aviation technicians and marine crews trust ALLProtect™ Original as their go-to floor protector.
Why Valuable Surfaces Need Maximum Protection
On a busy job site, the margin for error on a valuable surface is thin — one dropped tool, one careless cart, one slip on a wet floor can turn a completed job into a costly rework. This is exactly why ALLProtect™ Original exists: padded, absorbent, heavy duty multi-surface protection built for the toughest job sites — not just as a nice-to-have but as the difference between handing over work exactly as it should be, instead of paying for damage that never should have happened.
Stairs, walls, entryways and busy work zones take more abuse than any other surfaces on a job site. Heavy foot traffic, rolling equipment, dropped tools, spills and materials all concentrate in the same high-use areas, day after day. Without real cushioning and absorbency, even a durable surface — horizontal, vertical or raised, like a floor, a wall or a stair edge — can end up scratched, dented, gouged or stained before the project is finished.
The Problem: Thin, single-use protective floor coverings — plastic sheeting, paper rolls, even some lighter nonwoven products — fail in three ways:
- Impact: they offer little to no cushioning against impact, so a dropped hammer or a shifted piece of equipment goes straight through to the surface below.
- Spills: without real absorbency, spills pool on top, creating a slip hazard, or soak straight through, staining or damaging the surface underneath.
- Exposed surfaces: because most protective covering is built for standard flooring only, the result is multi-surface jobs left exposed — elevated surfaces like stairs and walls, or materials like metal and marble — with nothing rated to handle them.
The Solution: ALLProtect™ Original is engineered specifically for this problem. It’s built for maximum mechanical protection — able to handle the toughest demands any valuable surface can face. Here is how it answers each one:
- Impact absorbed: its padded construction — more than 2mm of dense nonwoven floor padding — cushions impact from dropped tools and heavy equipment.
- Spills contained: the surface is absorbent and impermeable at the same time — pulling spills into the material rather than letting them pool or spread, while blocking liquid from soaking through to whatever’s underneath. A GS3/R12-rated non-slip surface keeps footing secure even wet or greasy. A spill that would turn bare concrete into a slip hazard gets absorbed into the material instead, with the anti-slip rating holding steady throughout.
- Every surface protected: its self-adhesive reverse side keeps everything locked in place, on any angle, so it works on stairs, walls and elevated surfaces the same way it works on flat floors.
✔ Impact absorbed. ✔ Spills contained. ✔ Every surface protected.
Without Padded Protection
- Impact goes straight through to surface
- Spills pool on top, creating a slip hazard
- Spills soak through and damage the surface
- Wet or dusty surfaces slippery underfoot
- Covering sheets shift or bunch underfoot
- Tape often leaves residue behind
- Single-use, discarded after one job
- Slow installation, tape required
- Single-layer floor covering tears easily
- Punctures easily under impact
- Not rated for stairs, walls or elevated surfaces
- Limited to standard flooring
- May off-gas VOCs indoors
- Costly rework and damage claims
With ALLProtect™ Original
- ➜ Padded — absorbs impact, resists scratches
- ➜ Absorbent — pulls liquids in, no pooling
- ➜ Impermeable — spills stay contained
- ➜ Non-slip surface — secure footing even wet
- ➜ Self-adhesive — backing stays locked in place
- ➜ Residue-free — peels clean every time
- ➜ Reusable — easy to clean
- ➜ Quick install — no tape required
- ➜ Tear-resistant — high tensile strength
- ➜ Puncture resistant — tested to EN ISO 13433
- ➜ Elevated surfaces — stairs, walls etc.
- ➜ Multi-surface — wood, tile, concrete, metal …
- ➜ Zero VOCs — safe for enclosed spaces
- ➜ No rework, no callbacks, no claims
The Ideal Solution for Stairs
Non-slip, self-adhesive, padded stair protection for treads, risers, nose edges and handrails
Stairs are one of the toughest tests for any stair protection product: heavy foot traffic, dropped tools, and a surface that can’t afford to shift or slip. Landolt, the manufacturer, calls ALLProtect™ Original “the ideal solution for stairs and component protection,” and the certified numbers back it up. Its padded top layer cushions dropped tools and heavy footfall, and one self-adhesive piece wraps each tread, riser and nose edge, including curved and winder stairs.
How to Install Stair Protection
Installing ALLProtect™ Original on stairs with a squeegee, no tape.
Non-Slip on Every Step
GS3/R12 slip-resistance rated by the Swiss Council for Accident Prevention (bfu), and still non-slip when wet or greasy.
Won’t Shift or Tear
Shear-resistant, self-adhesive backing grips treads, risers and vertical railings, and doesn’t bunch or shift underfoot.
No Tape, No Residue
Sticks edge to edge on hardwood, stone and tile treads with no tape, and peels off clean at handover, ready for the next staircase.
Which Roll for Stairs?
Measure from the back of one step, over the edge, down to the next step. Then pick a roll at least that wide:
- Up to 19.69 in: Two-Pack
- Up to 24 in: Stair Kit (pre-sized, no cutting; also comes with a thin roll for handrails, 511 sq ft)
- Posts, columns and curved stairs: Three-Pack (13 in)
- Up to 39.37 in, landings and hallways: Large Roll
How ALLProtect™ Original Works
ALLProtect™ Original combines three certified properties in one integrated material — no layers to peel apart, no separate parts to fail. Here’s how each property does its job on the job site.

Padded, Absorbent & Impermeable
More than 2mm of dense nonwoven cushions impact from dropped tools and equipment, while absorbing over 400% of its weight in liquid — spills stay contained instead of pooling or soaking through.

Certified Non-Slip Surface
A GS3/R12 certified textile surface keeps footing secure even wet or greasy — traction that holds steady whether the job is on a stairway, a hangar floor or a wet boat deck.

Self-Adhesive Backing
A pressure-sensitive acrylic backing grips floors, walls, stairs and even irregular vertical surfaces without tape. The self-adhesive backing stays locked in place — no shifting, no bunching, no wrinkling — and pulls up clean when the job is done.

How To Install ALLProtect™ Original
A self-adhesive floor covering one person can lay
No tape. No tools required for adhesion. ALLProtect™ Original installs fast so you can get back to work.
One person rolling out a roll of self-adhesive temporary floor protection. It lays flat as it goes down.

1. Prep the Surface
Clean the surface with a mild cleaner, removing moisture, dust and debris. Ideal surface temperature is 41°F to 104°F for maximum adhesion.

2. Roll It Out
Position ALLProtect™ Original with the adhesive side facing down, directly onto the surface you’re protecting.

3. Cut to Fit
Trim the sheet with scissors or a utility knife to fit around doorways, stair returns and other edges — no special tools required.

4. Press and Go
Use a squeegee to press down firmly and smooth out air bubbles, developing the strongest possible adhesive contact — then get back to work.
At the end of the job, it lifts clean with no residue. Roll it back up, keep the adhesive side clean, and it is ready for the next floor.
Rolling the floor protection back up at the end of the job, clean and ready to lay again.
In summary: ALLProtect™ Original goes down in four steps (clean, roll out, cut to fit, press down with a squeegee), and one person can lay it. It lifts clean and can be reused.
Install Tips for Self-Adhesive Floor Protection
On the job
- New hardwood finishes: wait until the finish is fully cured before you lay it.
- Squeegee the whole sheet: work it over the edges as well as the middle, so every part of the backing makes contact.
- Walls, doorways and frames: the adhesive backing holds vertical surfaces on its own for months.
- Mixed floors: lay one piece straight across the join between hardwood and marble.
- Carts and dollies: wheels can run over it without moving or tearing it.
- Elevators and other busy spots: seam tape is not required, but it can help hold the edges down.
- Long jobs: look it over every 2–4 weeks. With care, it can stay down for months.
- Reusing it: peel it up when the job is done, keep the adhesive side clean, and lay it again. A dirty backing can still be used loose.
By roll
- Large Roll: trim to fit with scissors or a utility knife. It can also be cut to any custom width with a band saw.
- Two-Pack: pre-cut into 19.69 in widths, ideal for narrower stairs and runs, so there is no width to cut.
- Three-Pack: pre-cut into 13 in widths, ideal for posts, columns and curved surfaces, so there is no width to cut.
- Stair Kit: pre-sized, so there is no cutting. Start at the top. It has three 24.02 in rolls plus a 2.76 in roll for handrails.
- Perforated Roll: tear along the perforations, one every 20″, for quick pieces on site with no cutting tools.
Trusted by Aviation and Marine Professionals
What aircraft maintenance teams and yacht crews say about ALLProtect™ Original
“This is the best product I’ve used in 34 years. It provides damage control from falling objects, and gives us a sense of security when operating inches from the aircraft… it’s everything you all advertised it to be.”
Maintenance Chief Inspector, Business Aircraft Private Fleet
“We use ALLProtect in all departments (paint, cabinetry, delta fins, windows) when an aircraft comes in for maintenance. We find that it gives us, and the customer, the added protection while their aircraft is in our hands. The product applies easily and doesn’t leave residue. I highly recommend using ALLProtect for any maintenance event you may have.”
Aircraft Team Leader, West Star Aviation
“To protect wood, fabric panels, leather and all high traffic areas on the M5, we highly recommend ALLProtect. Installation is easy, fast and much better than anything else we have worked with before. It cuts easily to fit any size and can mold around sharp edges. It has become our trusted source to protect the most sensitive areas of our yacht.”
Chief Stewardess, Sailing Yacht M5
Video courtesy of AirCorps Aviation Depot and the Commemorative Air Force, Airbase Georgia
Custom Sizing & Perforated Rolls
Get the exact fit for your job site




ALLProtect™ Original doesn’t come in one fixed size. The Large Roll can be cut to any custom width by anyone with a band saw, leaving a clean, factory-quality edge — no fraying, no rough cuts. For jobs that need quick, tear-away pieces without cutting tools, the Perforated Roll is scored every 20″ down the length of the roll for fast, on-site sizing. And for stairs, hallways and handrails, the Stair Kit ships pre-sized so there’s no cutting required at all — including a version designed and custom-cut to fit most Gulfstream aircraft stairs, providing reusable, padded protection for this high-traffic, damage-prone area.
- Two-Pack — pre-cut into 19.69″ widths, Large Roll cut in half
- Three-Pack — pre-cut into 13″ widths, ideal for columns and curved surfaces
- Stair Kit — pre-sized rolls built for stairs, hallways and handrails, no cutting needed
- Perforated Roll — scored every 20″ for tool-free tear-away pieces
Perforated Roll: Tear, Don’t Cut
The ALLProtect™ Original Perforated Roll has factory-made perforations every 19.69″ (50 cm), so crews tear off smaller pieces of heavy duty surface protection by hand instead of cutting. It’s a time-saver and a safety feature that keeps sharp cutting tools off finished floors.
Available ALLProtect™ Roll Options
ALLProtect™ Original comes in five formats, so you can pick the right fit for any job — from full floors to stairs and railings.
|
Product Name: ALLProtect™ Large Roll
Packing Slip Item Code: APO LG
|
Picture of how it’s Packed | Description |
|
|
|
|
Product Name: ALLProtect™ Two-Pack
Packing Slip Item Code: APO 2P
|
Picture of how it’s Packed | Description |
|
|
|
|
Product Name: ALLProtect™ Three-Pack
Packing Slip Item Code: APO 3P
|
Picture of how it’s Packed | Description |
|
|
|
|
Product Name: ALLProtect™ Stair Kit
Packing Slip Item Code: APO S KIT
|
Picture of how it’s Packed | Description |
|
|
|
|
Product Name: ALLProtect™ Perforated Roll
Packing Slip Item Code: APO Perf
|
Picture of how it’s Packed | Description |
|
|
|
Technical Specifications
Technical specifications for ALLProtect™ Original heavy duty surface protection, tested and manufactured to Swiss quality standards.
| Material Composition | ||
| Nonwoven material | Polypropylene | |
| Reverse side material | PE film with pressure-sensitive acrylic coating | |
| Weight | 350 g/m² (+/- 10%) | |
| Thickness | > 2 mm | |
| Color | Mottled grey | |
| Technical Performance | ||
| Tensile strength MD/CD | > 900 N/5cm / > 1150 N/5cm | ISO 9073-3 |
| Static puncture resistance | 4 kN (-10%) | EN ISO 12236 (CBR-Test) |
| Dynamic perforation resistance | 10 mm (+10%) | EN ISO 13433 (Cone drop) |
| Anti-slip classification | Quality class GS3 / R12 | bfu list of requirements 2.032 |
| Water absorption ability | > 400% by weight | DIN 53923 |
| UV resistance (adhesion side, on glass/transparent surfaces) | Up to 2 months | |
| Tested resistance | Water, coffee, Coca-Cola, motor oil (SAE 30), grease, standard cleaners, Goo Gone, RAM Cleaner, WD-40, Methyl Ethyl Ketone (Skydrol chemical) | |
| Component/surface residue testing | No residue or minimal residue on painted aluminum, flat wood finish, high-gloss wood finish, and plated control knobs — tested under high heat, high humidity, freezing temperatures, and rotation between conditions; no test returned moderate or severe residue | |
| Environmental & Safety | |
| VOCs | Zero VOCs — no respiratory protection required under normal use |
| Toxicology | Toxicologically harmless — not intended for food contact |
| Flammability | Flammable |
| Disposal | Thermally disposable |
| Certifications & Quality Controls | |
| ISO 9001 | Bureau Veritas Certification |
| DGUV Test (IFA 1804184) | Safety tested (“Sicherheit geprüft”) by the Institute for Occupational Safety and Health of the German Social Accident Insurance (IFA) |
Why Swiss-Made Matters
ALLProtect™ Original is manufactured in Switzerland by Fritz Landolt AG, engineered to the standards professional job sites demand — from construction sites to aircraft interiors.

Swiss Engineering
Manufactured by Fritz Landolt AG, a Swiss company with roots dating back to the late 1800s and formally founded in 1920 — over a century of manufacturing experience behind every roll.

ISO 9001 Certified
Every batch is produced under a quality management system audited to international standards — continuously verified, not just tested once.

True Self-Adhesive Backing
Pressure-sensitive acrylic backing grips with real, lasting tack — no tape, no light-tack workaround. It sticks to floors, walls, stairs and vertical surfaces, and stays put through the toughest job site conditions, and pulls up clean with no residue left behind.
Shield Your Next Job Site With ALLProtect™ Original
Padded, self-adhesive and impermeable, built to protect your job site’s heaviest traffic and its most valuable assets. Available in custom sizes and a perforated roll for quick, tool-free cuts.
ALLProtect™ Original Heavy Duty Floor Protection in Action
From stairwells and elevators to countertops, glass, marine interiors and outdoor building facades, ALLProtect™ Original’s padded, self-adhesive protection keeps every valuable surface covered from job site to job site.









Frequently Asked Questions
Heavy duty floor and surface protection, answered
What is ALLProtect™ Original heavy duty surface protection?
ALLProtect™ Original is a heavy duty, self-adhesive felt sheet that works as padded floor protection and surface protection during construction, renovation, moves and installations. It has a padded, absorbent top layer, an impermeable layer beneath and a self-adhesive backing that holds it in place without tape. Made in Switzerland by Landolt, it is removed and rolled up when the work is done.
Is there non-slip floor protection that works when floors are wet or greasy?
Yes. ALLProtect™ Original is non-slip floor protection with a GS3/R12 slip-resistance rating (bfu), and its absorbent top layer soaks up spills (over 400% absorption) instead of leaving them standing. It is stay put floor protection and anti-slip surface protection for wet or greasy conditions. For high-visibility walkways, see ALLProtect™ Red.
Is floor protection reusable, or single-use?
ALLProtect™ Original is reusable floor protection. It can be lifted and used 10 times or more if the backing stays clean. Vacuum the backing between uses; the material doesn’t shed fibers. Replace pieces once they are worn, torn or heavily soiled. Reuse lowers the cost per job and creates less waste than single-use paper, cardboard and plastic sheeting.
Does self adhesive floor protection leave residue or damage surfaces when removed?
No. ALLProtect™ Original uses a true pressure-sensitive adhesive backing rather than tape or a light-tack coating, and it is residue-tested on painted aluminum, flat and high-gloss wood finishes and plated control knobs, under high heat, high humidity, freezing temperatures and changes between them, and it doesn’t leave a residue. Apply it only to fully cured finishes, and test a small area first on parquet and polished metal.
How long does a roll last and how long can it stay down?
One roll of ALLProtect™ Original can be used across multiple projects, as long as the backing stays clean and undamaged. On long jobs, inspect the protection and the surface underneath every 2–4 weeks. The only time limit we publish is for ALLProtect™ White on glass, which can stay on for up to 2 months of UV exposure.
How do you install and remove self-adhesive floor protection?
Clean and dry the surface, roll out the ALLProtect™ Original self adhesive floor protector, and press it down with a squeegee. One person can do it, with no tape needed, on surfaces between 41°F and 104°F (5–40°C). Cut it to fit with scissors or a utility knife, or tear it along the perforations on the Perforated Roll. Seam tape is optional for joints. To remove this padded floor protector, peel it back and roll it up. It works as self adhesive surface protection film for walls and glass too.
Can I use it as stair protection?
Yes. ALLProtect™ Original works as stair protection for treads and risers, and the Stair Kit is made for the job. It is pre-sized for stairs, hallways and handrails, with no cutting required: 3 rolls of 24.02 in (61 cm) plus a 2.76 in (7 cm) railing roll, each 82.02 ft long, for 511 sq ft with the mini roll. The self-adhesive backing conforms to irregular shapes and can be molded around vertical railings. It also protects aircraft air stairs, including Gulfstream air stairs.
Can it be used for door protection, door frames and jambs?
Yes. ALLProtect™ Original is door protection for door faces, door frames and jambs. The padded layer absorbs knocks from carts, tools and materials moving through the opening, and the self-adhesive backing holds it without tape. Peel it off when the work is finished.
Can it be used for countertop protection?
Yes. ALLProtect™ Original is countertop protection for quartz, granite, marble, laminate and wood counters during construction, installation and moves. The padded layer shields counters from dropped tools, scratches and spills. It isn’t approved for food contact, so remove it before the counters are used for food.
Can it protect elevators?
Yes. ALLProtect™ Original protects elevator cab floors and walls, mirrored glass, and door sills and tracks during moves and deliveries. It sticks without tape and peels off cleanly afterward. Seam tape is optional where sheets meet.
Can it be used outdoors, in garages and on patios?
Yes, for temporary outdoor floor protection and outdoor surface protection on patios, driveways and garage areas. ALLProtect™ Original is waterproof and non-slip. It sticks best on surfaces between 41°F and 104°F (5–40°C), so inspect it every 2–4 weeks on longer jobs.
Does it protect a garage floor from oil and spills?
Yes. ALLProtect™ Original is waterproof floor protection. Its top layer soaks up drips of paint, oil and water, and the impermeable layer beneath keeps them off the floor below. Roll it up and replace it once it is saturated or heavily soiled.
Does ALLProtect™ Original work on all types of surfaces?
ALLProtect™ Original works as true multi-surface protection across floors, stairs, walls, doorways, countertops and metal surfaces, indoors and as reliable outdoor surface protection alike. It’s designed for surfaces that need maximum protection against impact, spills and heavy traffic — not surfaces that are actively curing and need to breathe. For newly finished or still-curing floors, Vapor is the better fit — its vapor-permeable design lets moisture escape instead of trapping it, which ALLProtect™ Original’s impermeable barrier isn’t built to do.
Can it be used on freshly finished floors?
Only once the finish is fully cured, following the manufacturer’s cure time. ALLProtect™ Original is vapor-resistant, so on a curing floor use Vapor breathable floor protection. It then works as floorboard protection and protection for finished floors, tile, stone, concrete and glass. For windows and glass, use ALLProtect™ White.
Is it good for job sites, moves and installs?
Yes. ALLProtect™ Original is protection covering built for job sites, moves and installs. It also works for movers and delivery professionals protecting custom countertops, hardwood floors and appliances. Carts, toolboxes and heavy equipment don’t shift or tear it, it stays put without tape, and it absorbs drips and dropped tools. It is reusable from one stage of the job to the next.
Is it safe to use indoors with no ventilation?
Yes. ALLProtect™ Original has zero VOCs and doesn’t require a respirator under normal use, so it can be used in occupied homes, offices, hospitals and other enclosed spaces, including rooms with no ventilation.
What formats does it come in?
ALLProtect™ Original comes in these formats:
- Large Roll: 39.37 in × 82.02 ft, 269 sq ft. Also as a Two-Pack of 19.69 in rolls or a Three-Pack of 13 in rolls.
- Perforated Roll: 39.37 in × 98.43 ft (30 m), with perforations every 19.69 in (50 cm), so it tears by hand without cutting tools.
- Stair Kit: 3 rolls of 24.02 in (61 cm) plus a 2.76 in (7 cm) railing roll, each 82.02 ft, 511 sq ft with the mini roll. Pre-sized for stairs, hallways and handrails, no cutting required.
- Custom Sizing: the Large Roll band-saw cut to any width, with a clean, factory-quality edge, plus cut pieces and kits made to order.
Is ALLProtect™ Original suitable for aviation, aerospace and marine use?
Yes. ALLProtect™ Original is used as a surface protection shield in aviation, aerospace and marine work. It resists MEK, and Skydrol and landing gear fluids don’t pass through its impermeable layer. It also stands up to motor oil, solvents and standard cleaners. It is non-slip when wet or greasy, residue-tested, and trusted in aircraft interiors, hangars and marine environments. Remove it before the aircraft or vessel moves, and never use it on moving parts.
How proven is ALLProtect™ Original in demanding industries like aviation?
ALLProtect™ Original has been used in aviation since 2015, more than 10 years, with no callbacks or returns. It is trusted as a heavy duty surface protector by teams working on Gulfstream, Dassault, Bombardier, Learjet, Embraer and Pilatus aircraft.
Does ALLProtect™ Original contain silicone?
No. We have confirmed with the manufacturer that its suppliers don’t use silicone in the raw materials for this floor protection material, and silicone is not used in the standard production process.
Does it cause static electricity problems?
There are no reported static issues in use, but we have no official test data on static behavior. If static matters on your site, test a sample under your own conditions first. Contact us for a sample.
Can you walk on it in Tyvek shoe covers?
The surface of ALLProtect™ Original is non-slip, but we haven’t tested it with Tyvek shoe covers. Try a small area with your own footwear and protocol before use.
What is the difference between ALLProtect™ Original, Red and White?
ALLProtect™ Original, Red and White are all padded, self-adhesive and reusable. They differ in color and best use. ALLProtect™ Original is the grey, heavy duty protection for floors, stairs, walls and countertops. ALLProtect™ Red is exactly the same material in high-visibility red, for marking walkways and hazards and improving job site safety. ALLProtect™ White is translucent, for windows and glass where you want daylight through, and isn’t designed as a non-slip walking surface.
How does ALLProtect™ Original compare with Ram Board and Surface Shields?
Ram Board and Surface Shields are other temporary floor protection products, and we can only speak for our own. ALLProtect™ Original is self-adhesive with no tape needed, padded, absorbent, non-slip (GS3/R12) and reusable 10 times or more. See the technical data sheet for full specifications, or contact us to compare it against your job.
Where can I buy ALLProtect™ Original in the USA?
SurfaceLiner is the U.S. distributor of Landolt’s Swiss Made ALLProtect™, shipping from our warehouse in Denver, Colorado, to contractors, dealers and crews. Contact us for a quote or a sample, or download the technical data sheet. Need a high-visibility option? See ALLProtect™ Red.

Related Surface Protection Products
ALLProtect™ Original is built for heavy duty, high-traffic surfaces. For other surfaces and job site needs, explore the rest of the SurfaceLiner+ lineup.
ALLProtect™ Red
The same trusted ALLProtect™ performance in high-visibility red — built to improve job site safety.
ALLProtect™ White
Built for vertical surfaces like windows and doors — where ALLProtect™ Original’s padded grey material isn’t the ideal fit.
Vapor
Built specifically for newly finished, curing floors that need to breathe — the pick when an impermeable barrier isn’t the right fit.
MarineLiner
Purpose-built for boat builders protecting fiberglass during fabrication. Featured at IBEX 2025.




